推广 热搜: 采购方式  甲带  滤芯  气动隔膜泵  减速机  减速机型号  履带  带式称重给煤机  无级变速机  链式给煤机 

招标通知-巴基斯坦输电线路材料采购 9.14

   日期:2023-08-07 09:18:45     来源:网络整理    作者:本站编辑    浏览:18    评论:0    

1.The Islamic Republic of Pakistan has applied for financing from Asian Development Bank (ADB) towards the cost of Power Transmission Strengthening Project. Part of this financing will be used for payments under the contract for the Procurement of Goods – 500kV Double Circuit Quad Bundle Transmission Line from 500kV Maira Switching Station to 500kV Islamabad West Substation (approx. 131km), and 500kV double circuit transmission line from Maira Switching Station to Karot Switchyard (20km approx.) using ACSR “Drake” Conductor (“the Goods”).

The material shall be procured in seven (7) lots:

Lot #

Description

Quantity

Lot-I

500kV Transmission Line Steel Towers

490 Nos.

Lot-IIA

Conductor

3,300 km

Lot-IIB

Shield Wire

120 km

Lot-III

OPGW with 48 Fibers & OPGW with 24 Fibers Along-with Accessories

350 km

125 km

Lot-IV

Insulator Hardware Assemblies and

Accessories

Lot*

Lot-V

Dampers

Lot*

Lot-VI

Grounding Material

Lot*

Bidders may submit their bid for one lot or any combination of lots.

2.Open Competitive Bidding (international advertisement) will be conducted.Only eligible Bidders with the following key qualifications should participate in this bidding:

·The Bidder or its proposed Manufacturer must have at least five (5) years design/ manufacturing experience of similar Goods of the respective Lot having similar or higher rating and capacity.

·The Bidder or its proposed Manufacturer shall have manufactured and supplied similar Goods of similar or higher rating and capacity in the quantities at least equal to 100 percent quantities of the respective Lot within a continuous period of fifteen (15) months during the last ten (10) years in a single or multiple contracts. The Goods supplied by the bidder should have been in satisfactory operation for a continuous period of at least three years on the date of bid opening.

·In case of JV, all partners combined should fulfill this requirement. The Bidders who are not manufacturers themselves shall furnish an authorization from the concerned manufacturer to submit a bid for supply of their goods to Pakistan against this tender.

The completed qualification criteria are described in the Bidding Document.

3.To obtain further information and inspect the Bidding Documents, Bidders should contact:

Office of the Chief Engineer (Material Procurement & Management)

National Transmission and Despatch Company 8th Floor, Shaheen Complex, Egerton Road Lahore, Pakistan

Postal Code: 54000

Telephone: (0092) 42-99202597

Fax No.: +92-42-99202173

E-mail address: cempm@ntdc.com.pk

4.Deliver your bid:

·To the address above

· On or before the deadline of bids submission: 14 September 2023 at 11:00 hours (Pakistan Standard Time)

·Together with a Bid Security as described in the Bidding Document.

 
打赏
 
更多>同类资讯
0相关评论

推荐图文
推荐资讯
点击排行
网站首页  |  关于我们  |  联系方式  |  使用协议  |  版权隐私  |  网站地图  |  排名推广  |  广告服务  |  积分换礼  |  网站留言  |  RSS订阅  |  违规举报  |  皖ICP备20008326号-18
Powered By DESTOON